3G SDI to AV Converter - SDI to RCA/CVBS Converter
Product Description:
I. Introduction:
The SDI to AV converter allows SD-SDI, HD-SDI, and 3G-SDI signals to be displayed on CRT or HDTV, ensuring a high bit rate of 2.970Gbit/s for fast signal transmission without any loss. For professionals, this means easier distribution and expansion of your 3G SDI signals, and the ability to display your work on a television due to the built-in converter. Additionally, the designed loop through 3G-SDI enables users to enjoy both SDI and AV simultaneously.
II. Features:
Operates at 2.970Gb/s, with variations including 2.970/1.00 1Gb/s, 1.485Gb/s, and 1.485/1.00 1Gb/s.
Balanced and reclocked output.
Automatic video mode detection (3G/HD/SD).
Converts from SMPTE 425M level B to level A 1080P 50/59.94/60 4:2:2 10-bit.
Connect with other units to extend signal distance.
Simultaneous display of SDI/AV signals.
Analog 2CH audio output.
Supports signal transmission distances of up to 300 meters for SD signals, 200 meters for HD signals, and 100 meters for 3G signals when using Belden 1694A test cables. Note that distances may vary with different cables.
III. Package Includes:
3G SDI to AV SCDMA Converter x 1
5V DC Power Adapter x 1
User Manual x 1
IV. Specifications:
Compliant with SMPTE standards 425M levels A and B, 424M, 229 meters, 259 meters C.
SDI transmission rates of 2.970 Gb/s and 2.970/1.01 Gb/s.
SDI I/O resolutions: SD: 480i@60, 566I@50; HD: 720P@50/60, 1080I@50/60; 3G: 1080P@24/25/27.97/30/50/59.94/60.
Output resolution: PAL/NTSC.
Input port: 1x BNC (SD/HD/3G-SDI).
Output ports: 1x BNC (SD/HD/3G-SDI), 3x RCA (CVBS, L/R).
Power supply: 5V.
ESD protection: Human body model ±8kV (air discharge), ±4kV (contact discharge).
Dimensions: 92mm x 67mm x 25mm.
Weight: 180 grams.
Operating temperature: 0°C to 40°C / 32°F to 104°F.
Storage temperature: -20°C to 60°C / -4°F to 140°F.
Relative humidity: 20% to 90% Rh (non-condensing).
Max power consumption: 5W.
V. Operational Controls and Functions:
SDIN: Connect your SDI source here to send SDI signals to the screen for display.
SDIOUT: Connect your SDI monitor here with an SDI cable for input display.
Link: This green LED will light up when the device is connected to an SDI signal.
Power: The red LED will illuminate when the power is connected.
PAL/NTSC: Press this button to select between PAL or NTSC.
DC-5V: Insert the 5V DC power into the unit and connect the adapter to an AC wall outlet.
Audio Channels: Connect your TV using RCA cables to this channel.
